CCNP Data Center 300-620 DCACI certification exam tests your knowledge of Cisco switches in ACI mode!
Lead4Pass has collected 208 latest 300-620 exam questions and answers, covering the complete practical exam! You can use the 300-620 dumps with PDF and VCE: https://www.lead4pass.com/300-620.html to prepare for the exam.
Both 300-620 dumps PDF and 300-620 dumps VCE contain the latest exam questions and answers, you can choose according to your learning habits, and you are guaranteed to pass the CCNP Data Center 300-620 DCACI certification exam 100%.
- 300-620 Online Practice Tests
- 300-620 Exam Questions Answers
- 300-620 PDF download
- Suitable for 300-620 DCACI-certified jobs
CCNP Data Center 300-620 Online Exam Practice
An engineer created two interface protocol policies called Pol_CDP40275332 and Pol_LLDP46783451. The policies must be used together in a single policy.
Which ACI object must be used?
A. interface policy group
B. switch policy group
C. switch profile
D. interface profile
Which two types of interfaces are supported on border leaf switches to connect to an external router? (Choose two.)
A. subinterface with VXLAN tagging
B. subinterface with 802.1Q tagging
C. FEX host interface
D. out-of-band interface
E. Switch Virtual Interface
Which tenant is used when configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?
When does the Cisco ACI leaf learn a source IP or MAC as a remote endpoint?
A. When VXLAN traffic arrives on a leaf fabric port from the spine and outer source IP is in the Layer 3 Out EPG subnet range.
B. When VXLAN traffic arrives on a leaf fabric port from the spine and outer source IP is in the bridge domain subnets range.
C. When VXLAN traffic arrives on a leaf fabric port from the spine and inner source IP is in the Layer 3 Out EPG subnet range.
D. When VXLAN traffic arrives on a leaf fabric port from the spine and inner source IP is in the bridge domain subnets range.
An engineer must advertise a bridge domain subnet out of the ACI fabric to an OSPF neighbor.
Which two configuration steps are required? (Choose two.)
A. Add External Subnet for External EPG flag under External EPG
B. Configure Subnet scope to be Advertised Externally
C. Configure the Subnet under the EPG level
D. Create a Route Control Profile with the export direction under External EPG
E. Add L3Out profile to the bridge domain using the Associated L3Outs section
An ACI administrator notices a change in the behavior of the fabric.
Which action must be taken to determine if a human intervention introduced the change?
A. Inspect event records in the APIC UI to see all actions performed by users.
B. Inspect /var/log/audit_messages on the APIC to see a record of all user actions.
C. Inspect audit logs in the APIC UI to see all user events.
D. Inspect the output of show command history in the APIC CLI.
Which setting prevents the learning of Endpoint IP addresses whose subnet does not match the bridge domain subnet?
A. “Limit IP learning to network” setting within the bridge domain.
B. “Limit IP learning to subnet” setting within the EPG.
C. “Limit IP learning to network” setting within the EPG.
D. “Limit IP learning to subnet” setting within the bridge domain.
An engineer must configure a group of servers with a contract that uses TCP port 80. The EPG that contains the web servers requires an external Layer 3 cloud to initiate communication.
Which action must be taken to meet these requirements?
A. Configure the EPG as a provider and L3 out as a consumer of the contract.
B. Configure OSPF to exchange routes between the L3 out and EPG.
C. Configure a taboo contract and apply it to the EPG.
D. Configure the EPG as a consumer and L3 as a provider of the contract.
An engineer must implement management policy and data plane separation in the Cisco ACI fabric. Which ACI object must be created in Cisco APIC to accomplish this goal?
A. Application profile
D. Bridge domain
An engineer must add a group of 70 bare-metal ESXi servers to the Cisco ACI fabric, which is integrated with vCenter.
These configuration steps are complete:
The configured pool of ESXi hosts is configured with an Attachable Access Entity Profile (AAEP) called AEP_VMM.
The new group uses the AAEP called AEP_BAREMETAL.
Which action extends functional VMM integration to the new nodes?
A. Update AAEP to AEP_VMM on all policy groups that are used toward bare-metal servers.
B. Create a new AAEP container object for policy groups for AEP_VMM.
C. Implement a separate VMM domain for the bare-metal servers by using AEP_VMM.
D. Add the VMM domain under the AEP_BAREMETAL AAEP object.
What happens to the traffic flow when the Cisco ACI fabric has a stale endpoint entry for the destination endpoint?
A. The leaf switch does not learn the source endpoint through data plane learning.
B. The leaf switch drops the traffic that is destined for the endpoint.
C. The leaf switch floods the traffic to the endpoint throughout the fabric.
D. The leaf switch sends the traffic to the wrong destination leaf.
Which new construct must a user create when configuring in-band management?
A. VLAN pool
B. management contract
C. management tenant
D. bridge domain
How is broadcast forwarded in Cisco ACI Multi-Pod after ARP flooding is enabled?
A. Ingress replication is used on the spines to forward broadcast frames in the IPN infrastructure.
B. Within a pod, the ingress leaf switch floods the broadcast frame on all fabric ports.
C. Broadcast frames are forwarded inside the pod and across the IPN using the multicast address that is associated with the bridge domain.
D. For the specific bridge domain, all spines forward the broadcast frames to IPN routers.
Verify 300-620 Exam Questions Answers
Download the above 300-620 exam questions and answers online
Suitable for 300-620 DCACI-certified jobs
This certification is designed for network administrators, network engineers, and system engineers who work with data center solutions.
Here are some job roles that are suitable for individuals holding the 300-620 DCACI certification:
Network Engineer (Data Center): As a network engineer, you will be responsible for designing, implementing, and maintaining network infrastructure in data center environments.
Your knowledge of Cisco ACI will be valuable in deploying and managing application-centric networks.
Systems Engineer (Data Center): In this role, you will work closely with network engineers and architects to design and implement data center solutions.
Your expertise in Cisco ACI will help you understand how the network infrastructure integrates with storage, computing, and virtualization components.
Network Architect: Network architects are responsible for designing and planning network solutions for organizations. With the 300-620 DCACI certification, you can specialize in data center network architecture, incorporating Cisco ACI to build flexible and automated networks.
Pre-sales Engineer: In a pre-sales engineering role, you will work closely with sales teams to understand customer requirements and propose appropriate solutions.
Your knowledge of Cisco ACI will help you demonstrate the benefits and capabilities of ACI to potential customers.
These are just a few examples of job roles suitable for individuals with the 300-620 DCACI certification.
The certification demonstrates your expertise in Cisco ACI, making you a valuable asset in organizations that utilize or plan to implement ACI-based data center solutions.
Keep in mind that specific job requirements may vary based on the organization and its needs.
Finally, I want to say:
CCNP Data Center 300-620 DCACI certification exam is a very professional exam, getting certified can help you get more job options, 300-620 dumps: https://www.lead4pass.com/300-620.html
It is a complete and effective test preparation program designed to help you study efficiently and pass the test successfully, saving you money!
PS. Follow here! Unscheduled Cisco free exam practice questions to share online!