2022 New CheckPoint 156-315.80 Dumps | Successfully Passed Exam

156-315.80 dumps 2022

156-315.80 is one of the most popular certifications for Checkpoint!Lead4Pass many exam experts after a long time of hard work, today in January 2022 released the latest updated CheckPoint 156-315.80 exam questions – Lead4Pass 156-315.80 dumps.

Lead4Pass 156-315.80 dumps has two modes dumps pdf and dumps VCE, which are 100% true and effective to help you pass the exam – 156-315.80 dumps (2022.1 updates): https://www.leads4pass.com/156-315-80.html (484 Q&A dumps)

And: Share a part of the latest updated 156-315.80 exam questions online exam test (the answer to the exam question will be announced at the end of the article)

Continue: Or download the 156-315.80 dumps PDF for free sharing online: https://drive.google.com/file/d/1q_kxUXRYuedZU2eFzTw4KGnFETbZLbfc/

156-315.80 exam questions online exam practice

QUESTION 1

Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new CPU to
replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?

A. Go to clash-Run cpstop | Run cpstart

B. Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security
Gateway

C. Administrator does not need to perform any task. Check Point will make use of the newly installed CPU and Cores

D. Go to clash-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig | Reboot Security
Gateway | Install Security Policy

 

QUESTION 2

What is the command to check the status of the SmartEvent Server?

A. fw ctl get int cpsemd_stat
B. cp_conf get_stat cpsead
C. fw ctl stat cpsead
D. cpstat cpsead

Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=andsolutionid=sk113265

 

QUESTION 3

After verifying that API Server is not running, how can you start the API Server?

A. Run command “set api start” in CLISH mode
B. Run command “mgmt_cli set api start” in Expert mode
C. Run command “mgmt api start” in CLISH mode
D. Run command “api start” in Expert mode

 

QUESTION 4

In what way are SSL VPN and IPSec VPN different?

A. SSL VPN is using HTTPS in addition to IKE, whereas IPSec VPN is clientless
B. SSL VPN adds an extra VPN header to the packet, IPSec VPN does not
C. IPSec VPN does not support two factor authentication, SSL VPN does support this
D. IPSec VPN uses an additional virtual adapter; SSL VPN uses the client network adapter only.

 

QUESTION 5

Which command is used to set the CCP protocol to Multicast?

A. cphaprob set_ccp multicast
B. cphaconf set_ccp multicast
C. cphaconf set_ccp no_broadcast
D. cphaprob set_ccp no_broadcast

Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=andsolutionid=sk20576

 

QUESTION 6

After trust has been established between the Check Point components, what is TRUE about name and IP-address
changes?

A. Security Gateway IP-address cannot be changed without re-establishing the trust.
B. The Security Gateway name cannot be changed in command line without re-establishing trust.
C. The Security Management Server name cannot be changed in SmartConsole without re-establishing trust.
D. The Security Management Server IP-address cannot be changed without re-establishing the trust.

 

QUESTION 7

In what way is Secure Network Distributor (SND) a relevant feature of the Security Gateway?

A. SND is a feature to accelerate multiple SSL VPN connections
B. SND is an alternative to IPSec Main Mode, using only 3 packets
C. SND is used to distribute packets among Firewall instances
D. SND is a feature of fw monitor to capture accelerated packets

 

QUESTION 8

Installations and upgrades with CPUSE require that the CPUSE agent is up-to-date. Usually the latest build is
downloaded automatically. How can you verify the CPUSE agent build?

A. In WebUI Status and Actions page or by running the following command in CLISH: show installer status build

B. In WebUI Status and Actions page or by running the following command in CLISH: show installer status version

C. In the Management Server or Gateway object in SmartConsole or by running the following command in CLISH: show
installer status build

D. In the Management Server or Gateway object in SmartConsole or by running the following command in CLISH: show
installer agent

 

QUESTION 9

Fill in the blank: The command ___________ provides the most complete restoration of a R80 configuration.

A. upgrade_import
B. cpconfig
C. fwm dbimport -p
D. cpinfo -recover

 

QUESTION 10

Return oriented programming (ROP) exploits are detected by which security blade?

A. Check Point Anti-Virus / Threat Emulation
B. Intrusion Prevention Software
C. Application control
D. Data Loss Prevention
Correct Answer: A

Reference: https://www.checkpoint.com/customer-stories/se2/

 

QUESTION 11

Which command shows detailed information about VPN tunnels?

A. cat $FWDIR/conf/vpn.conf
B. vpn tu tlist
C. vpn tu
D. cpview

Reference: https://sc1.checkpoint.com/documents/R80.20_GA/WebAdminGuides/EN/CP_R80.20_CLI_ReferenceGuide/html_frameset.htm?topic=documents/R80.20_GA/WebAdminGuides/
EN/CP_R80.20_CLI_ReferenceGuide/209239

 

QUESTION 12

Check Point security components are divided into the following components:

A. GUI Client, Security Gateway, WebUI Interface
B. GUI Client, Security Management, Security Gateway
C. Security Gateway, WebUI Interface, Consolidated Security Logs
D. Security Management, Security Gateway, Consolidate Security Logs

Verify answer:

Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12
BDDDBACAAABB

All CheckPoint 156-315.80 exam questions will be updated in 2022, guaranteed to be true and valid, and get complete CheckPoint 156-315.80 dumps to ensure 100% pass the exam (2022.1 updates): https://www.leads4pass.com/156-315-80.html (484 Q&A dumps)

PS.Free to share the latest updated 156-315.80 dumps PDF: https://drive.google.com/file/d/1q_kxUXRYuedZU2eFzTw4KGnFETbZLbfc/